Single End Preheater
The Teleweld Single End Heater can be used wherever fast, economical heating of rail (engine burns), frogs, crossing or switch points is desired. It can also be used on new engine burns before hardening and spalling take place, to draw the hardened metal down to a safe limit and eliminate the necessity for later welding.
The Single End Heater will heat the head of the rail to 700°-800°F in approximately 3 minutes and to 1100°-1200°F in approximately 6 minutes. Fuel consumption for the Teleweld heaters is approximately 4 pounds of LPG per hour burner at full heat.
Description
The Teleweld Single End Heater can be used wherever fast, economical heating of rail (engine burns), frogs, crossing or switch points is desired. It can also be used on new engine burns before hardening and spalling take place, to draw the hardened metal down to a safe limit and eliminate the necessity for later welding.
The Single End Heater will heat the head of the rail to 700°-800°F in approximately 3 minutes and to 1100°-1200°F in approximately 6 minutes. Fuel consumption for the Teleweld heaters is approximately 4 pounds of LPG per hour burner at full heat.
